SELF-LEVELLING FROM 2 MM TO 4 MM - Ivas
Ivas Industria vernici

SELF-LEVELLING FROM 2 MM TO 4 MM - Ivas

 SELF-LEVELLING FROM 2 MM TO 4 MM

| BROCHURE
hai cercato: SELF-LEVELLING FROM 2 MM TO 4 MM indietro 

High Thickness Self-Levelling Epoxy Procedure

High thickness, modified epoxy resin based, continuous coating for floors. Pigmented, waterproof, solvent free, with high mechanical and chemical performance. Can be applied to substrates of different physical format, intended for heavy traffic using heavy wheeled vehicles.

Intended for

Interior
  • food industries
  • chemical and pharmaceutical industries
  • mechanical engineering and warehouses
  • electronic engineering
  • garages and covered car parks

TECHNICAL DATA

  • Suitability of the substrate (concrete)
  • Residual moisture content: < 5%
  • Compressive strength: > 22 MPa
  • Surface resistance to tearing: > 1.5 MPa
  • Total thickness of coating: approx. 3 mm
| system sheet

Composition of the System

  • 1 Stabiliser / Primer Epoxy Fondo
  • 2 Intermediate layer Epoxy Fondo mortar
  • 3 Wear layer Epoplast mortar
  • 4 Protective finish
    (if required)
    polyurethane enamel in water dispersion: Metroresin Matt K or Metroresin Gloss K or solvent based Paviglass
    (matt or glossy)

Products of the System

Self-Levelling Antistatic Epoxy Procedure

Medium thickness, modified epoxy resin based, continuous coating for antistatic floors. Pigmented, waterproof, solvent free, containing conductive fillers for electrical conductivity. The synergy of the antistatic properties and the outstanding mechanical and chemical characteristics makes this procedure especially suitable for areas such as electronic industries, hospitals and wherever machinery that requires low conductivity flooring is used.

Intended for

Interior
  • hospitals and operating theatres
  • chemical and pharmaceutical industries
  • precision engineering industries
  • electronic engineering

TECHNICAL DATA

  • Suitability of the substrate (concrete)
  • Residual moisture content: < 5%
  • Compressive strength: > 22 MPa
  • Surface resistance to tearing: > 1.5 MPa
  • Total thickness of coating: approx. 2 mm
| system sheet

Composition of the System

  • 1 Stabiliser/Primer Epoxy Fondo
  • 2 Intermediate layer
    (if required)
    Epoxy Fondo mortar
  • 3 Conductive filler Mesh in copper strips
  • 4 Antistatic primer Epoxy Fondo AS
  • 5 Wear layer Epoplast AS

Products of the System

Self-Levelling Water-Based Epoxy Procedure

High Thickness, continuous coating for self-levelling/multi-layer flooring, with modified epoxy resin in aqueous emulsion. Pigmented, waterproof. Superb mechanical and chemical performance, with smooth or antiskid surface.

Intended for

Interior
  • food industries
  • chemical and pharmaceutical industries
  • mechanical and electronics industries
  • garages and covered car parks
  • underground parking lots

TECHNICAL DATA

  • Suitability of the substrate (concrete)
  • Residual moisture content: < 5%
  • Compressive strength: > 22 MPa
  • Surface resistance to tearing: > 1.5 MPa
  • Total thickness of coating: approx. 3 mm
| system sheet

Composition of the System

Products of the System

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on:

corporate