High insulation - Ivas
Insulated Renders Insulated Renders

High insulation - Ivas

seo titolo secondo

 High insulation

hai cercato: High insulation indietro 

TermoK8 ® grafite PLUS CONVERTO

Ivas

The ideal option for guaranteeing very high thermal performance, even in thin coats, thanks to the graphite particles contained in the special, unstressed insulation slab. It ensures dimensional stability, perfectly flat surfaces, and secure gluing, even during maximum sunlight. The use of a single raw material ensures that the thermal properties remain uniform throughout the entire thickness of the slab. The absence of any surface cuts ensures a truly uniform product when skimming the external thermal insulation system, eliminating the risk of crackling caused by the infiltration of the skim coat into the cuts themselves.

  •   TermoK8® Design
  •   CAM approved panels
  •   High insulation

  •   Simplicity of installation

  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

High insulation - Ivas

seo titolo secondo

TermoK8 ® HP CONVERTO

Ivas

The ideal option for high thermal performance that combines reduced thickness and easy installation. It features a special graphite panel with white surface — obtained through a unique lamination synthesis process — that ensures truly uniform thermal properties by combining the performance of graphite with the simplicity and easy installation of conventional white polystyrene. Compared to conventional EPS solutions, with the same applied thickness and type of substrate, insulating performance increases by 19% due to the innovative High Performance (HP) panel combined with the state-of-the-art adhesive-skim coat (Klebocem Termico) with thermal conductivity value λ = 0,23 W/(m·K) which ensures insulating performance four times higher than a standard adhesive-skim coat λ = 0,85 W/(m·K).

  •   TermoK8® Design
  •   CAM approved panels
  •   High insulation

  •   Simplicity of installation

  •   Fire resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

High insulation - Ivas

seo titolo secondo

TermoK8 ® FONOSTOP CONVERTO

Ivas

The ideal option for simply and effectively complying with the regulations on energy efficiency and noise pollution. The system includes an insulation panel made of EPS with low dynamic stiffness graphite, featuring a special grooved pattern, designed to give the optimal balance between thermal and acoustic insulation properties combined with maximum ease of installation and excellent reaction to fire. This option is also characterised by high resistance to impacts (20 joules). Sound insulation certificate

  •   TermoK8® Design
  •   CAM approved panels
  •   High insulation

  •   Fire resistance

  •   Thermo-acoustic insulation
  •   Impact resistance

 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components

High insulation - Ivas

seo titolo secondo

TermoK8 ® slim

Ivas

The ideal option for combining high thermal efficiency and low insulation thickness. Especially suitable for upgrading the energy efficiency of existing buildings, due to its reduced thickness with equivalent insulation performance. The insulating panel is EPD (Environmental Product Declaration) certified

  •   High insulation

  •   Fire resistance

  •   Reduced thicknesses

  •   EPD certified panels
  •   CAM approved panels
 

Certificates

Technical Documents

System Composition

ADDITIONAL COMPONENTS: depending on the type of support and critical issues of each building, for the correct application of insulation systems TermoK8 various additional components (shown below) are needed to complete the steps above.

System Components

Additional Components
High insulation   - Share on Google plus High insulation   - Share on Linkedin High insulation   - Share on Pinterest High insulation   - Share on Twitter High insulation   - Share on Facebook

b2b

enter
img Ivas Industria Vernici Spa
  • Via Bellaria, 40
  • 47030 San Mauro Pascoli (FC) - Italia
  • ph. +39 0541 815811
  • fax +39 0541 815815
  • info@gruppoivas.com
follow us on: